Arraid LLC, the advanced storage systems design, development and integration specialist, has launched HotBackup, a solid state, CompactFlash-based dual drive for replacing ageing and failed SCSI-based legacy electro-mechanical storage systems including hard disk, magneto optical, tape and floppy drives.
Incorporating twin CompactFlash drives, HotBackup enables the two CompactFlash (CF) cards to work as a mirrored pair providing increased resilience and fault-tolerance.
The HotBackup drive is presented to the host system as a single logical drive that will continue to operate seamlessly.
This allows the second CF card to be removed or dismounted for backup over the Ethernet port, giving a full disk image backup without dismounting the drive. The HotBackup functionality ensures that any previously paired CF card, maintains a log file of the sectors written so that it can be used to quickly re-synchronize with the removed or replaced second card to re-establish a mirrored pair.
For making full image backups, it also includes a remote dismount feature which operates independently from the control of the host system to enable any CF card in a mirrored pair to be taken offline with the minimum of operational interruption to the host. An image can be restored to a CF card either by inserting a backup CF card or writing to a CF card over the Ethernet port.
The HotBackup drive fully integrates with Arraid’s Recovery Manager network software which is used for control and configuration as well as network backup and restore operations.
HotBackup is ideally suited for use in process critical legacy computer systems where downtime for maintenance and backup cause major disruption and expense. These are found in a range of industries including telecommunications, semiconductor manufacturing, industrial process control, engineering and manufacturing, power generation, oil & gas, military & aerospace, flight simulation and post-production.
The HotBackup drive is available in 50-pin, 68-pin and 80-pin variants supporting 2.5 inch, 3.5 inch or larger 5.25 inch form factors and operates with CF cards of up to 256GB in capacity.
Features and Benefits
- HotBackup Drive is available in 2.5" 50 pin SCSI Solid State Drive / 3.5” 50 pin Narrow SCSI Solid State Drive / 3.5” 50 pin Narrow SCSI SSD Drive / 68 pin Wide, Wide Differential, Wide LVD SCSI Solid State Drive / 80 pin Wide, Wide LVD (8bit) SCSI Solid State Drive variants.
- HotBackup Drive enables the two CompactFlash (CF) cards to work as a mirrored pair providing increased resilience and fault-tolerance.
- HotBackup Drive is presented to the host system as a single logical drive that will continue to operate seamlessly if either of the CF cards fails.
- Allows one CF card to be removed or dismounted for backup over the Ethernet port, giving a full disk image backup without dismounting the drive.
- The HotBackup functionality ensures that any previously paired CF card, maintains a log file of the sectors written so that it can be used to quickly re-synchronize with the removed or replaced second card to re-establish a mirrored pair.
- Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface.
For full bit for bit image backups, it also includes a remote dismount feature which operates independently from the control of the host system to enable any CF card in a mirrored pair to be taken offline with the minimum of operational interruption to the host.
- A bit for bit image can be restored to a CF card either by inserting a backup CF card or writing to a CF card over the Ethernet port.
- Small format PCB converts Compact Flash Media to appear as a SCSI device on a Host’s SCSI bus.
- 2.5” form factor PCB which will replace any 2.5” disk drive or larger drives with customised housing.
- Will fit in a 3.5” or customised Disk slots.
- Allows the CF Cards up to 64GB (SLC) and 256GB (MLC) to attach to the SCSI bus.
- SCSI Host will typically see the device as a disk drive of any emulation.
- Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface.
- Microcode is field upgradable via integral comport
- Optional integration support available if required
Contact
